As part of my ongoing work with my 10x8 camera, I'm happy to offer for sale 'Fallen Tree' as a darkroom print. I have made a very limited number of contact prints from the 10 x 8 negative, on Ilford's Warmtone Fibre Based paper. The image size is a little smaller than 10 x8, and the paper size is nearly 11 x 14 inches. This allows the print to be mounted with a paper border showing, should the buyer wish. As always, the screen image fails to do the print justice, which really needs to be seen in person to be fully appreciated.
I have been looking forward to printing this negative for some time. The print is on warmtone fibre based paper (hence the gentle curl at the edges).
I began with my usual procedure of making test strips at grade 2.5, but soon went down the grades as I felt that the negative demanded an open and gentle tonality. The grade I used in the end was 1.4. There is a very extensive tonal range, and the print does not lack contrast, even at this low grade. I think I achieved the kind of open tonality I was after.
The print size is a little larger than I would normally print at for 35mm. It was made using my Zeiss C Sonnar 50mm lens, and the bright, strongly backlit scene allowed for a favourable aperture and shutter speed combination (favourable, that is, to securing the necessary sharpness for a good enlargement).
A fine product from Ilford and a mainstay of many darkrooms in this country is Multigrade IV Resin Coated paper. It’s the paper I use most with my students and it comfortably facilitates a novice’s first steps towards a satisfying print.
Not all darkroom papers are equal however, and if you have begun your darkroom journey with a paper such as this, you may wish to consider trying a warmtone paper too. For me, warmtone is my paper of choice, and you will often come across advice to make the switch to it on grounds of an improvement in quality.
Now, I’m not sure it is objectively ‘better’, nor do I quite agree with the advice I sometimes see that it will give you a ‘better’ tonal range (as if merely making the switch is enough to ensure printing contentment).
What it does give you is a different distribution of tones at different grades, and, with the right negative, this may well result in a more satisfying and expansive tonal range. I know it does for me in the vast majority of cases.
Multigrade IV has a very long reach into the highlights at middle grades, while it is somewhat lacking in local contrast in the midtones. If your negative has a lot of midtones, this can result in a muddy and disappointing rendering. Multigrade IV Warmtone on the other hand, has much more ‘punch’ and tonal separation in the midtones, albeit at the expensive of the highlight scale. It gravitates towards a crisp white in the highlights quicker than its cousin, and this may not be an issue in the case of the midtone dominated scene. As is so often the case in photography, this is a question of compromise, or more accurately, of the right compromise for your particular equipment and visualisation.
It is good darkroom practice to know the tonal characteristics of your paper and to match them to your negative. In reality one paper may very well suffice for the majority of your printing, but if you haven’t tried any alternatives, how do you know? It may be time to try the warmtone option, and to see how it works with your negatives and vision.
If you enjoyed my post, you might like to subscribe to my site here.
Purchases made with Amazon following the links on my site help me cover costs for posting the content I make. I get a small commission from Amazon at no extra cost to you. Alternatively, you can donate directly here. Thank you for your kind support!